By Adalheid Voigt. Midcentury. At Wednesday, January 16th 2019, 20:52:46 PM.
The eight-way hand tied springs system is one of the best support systems. The craftsman connects each spring to the adjoining one with a strong twine. The twine passes front to back, side to side and then diagonally in both directions, thus tying each spring securely. Another method is sinuous spring construction. Sinuous springs are “S”-shaped and run from the front of the seat to the back. These springs are supported by additional wires that cross from side to side. This also makes for a strong seat, and it might be the preferred option in a sleeker style or smaller frame because it requires less space.
Kiln-dried frames are superior because you can be sure about the reduction of the moisture content to a satisfactory level. Another thing to remember about sofa frames is that a sofa frame that is made of kiln-dried hardwood is a much better choice than a softwood frame even if it is kiln dried. When you look for frames that will last, make sure to ask about how it has been constructed because that is just as important. A well-constructed frame has reinforced joints that are dowelled and glued and uses screws instead of staples.
This sofa placement isn‘t for design novices. As a general rule, you don’t want to place a sofa in front of a door because you don’t want to block it, and you don't want people to walk into the back of the sofa. However, if there's enough space and the back of the sofa has nice upholstery, this look can work very well. But it´s imperative that there be enough space to still have a comfortable traffic path. You also want to make sure to minimize any potential of visual obstructions. So if there´s any doubt, don‘t do it.