By Adalheid Voigt. Midcentury. At Wednesday, January 09th 2019, 01:59:32 AM.
The seating support is also an important component in determining the quality of a sofa. It works in tandem with the frame and the filling. A sturdy frame provides an anchor for good seating support and filling augments it. You should always test the quality of seating support by sitting on a sofa before you buy it. It shouldn‘t sag, and it should provide good support in the seat and in the back.
In a good-quality frame, the joints get special attention. They are glued, dowelled, and screwed. The corners are further strengthened by the addition of reinforcing blocks for extra support and strength. Generally speaking, plywood and particleboard frames are inferior, especially if they are held together with staples. Additional layers of plywood can help reinforce the frame, so as you can see, construction matters as much as material. If you must choose a sofa with a plywood frame, make sure it has at least 11 to 13 layers of plywood.
Kiln-dried frames are superior because you can be sure about the reduction of the moisture content to a satisfactory level. Another thing to remember about sofa frames is that a sofa frame that is made of kiln-dried hardwood is a much better choice than a softwood frame even if it is kiln dried. When you look for frames that will last, make sure to ask about how it has been constructed because that is just as important. A well-constructed frame has reinforced joints that are dowelled and glued and uses screws instead of staples.